Items where Division is "Faculty of Science and Technology > Department of Mechanical Engineering" and Year is 1996

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Number of items: 62.

Adiyono, Aloysius Lilik (1996) Pengaruh suhu curing terhadap komposit polimer. Skripsi thesis, Sanata Dharma University.

Arthanto, Yohanes Erwien (1996) Penelitian kekuatan komposit gfrp sebagai fungsi arah serat : e-glass/polyester ortophtalic resin yukalac 157 bqtn-ex. Skripsi thesis, Sanata Dharma University.

Bagaskara, Andreas Neutron Gagat (1996) Design of industrial robot for material handling. Skripsi thesis, Sanata Dharma University.

Budi Ariyanto Raharjo, - (1996) Pengaruh gerakan pemakanan konvensional dan climbing terhadap kekasaran permukaan pada baja ST 60. Skripsi thesis, Sanata Dharma University.

Budi Baroto, Pancar (1996) Perancangan robot industri untuk painting. Skripsi thesis, Sanata Dharma University.

Budi Kristanto, Benedektus (1996) The influence of volume fraction of catalyst on composite tensile strenght. Skripsi thesis, Sanata Dharma University.

Budi Nugroho, Budi Nugroho (1996) Moderate speed radial flow centrifugal pump. Skripsi thesis, Sanata Dharma University.

Budiarman H, Janrisen (1996) Redesign of UT-150 kawasaki industrial robot. Skripsi thesis, Sanata Dharma University.

Darmanto, Yohanes (1996) Perancangan irigation pump. Skripsi thesis, Sanata Dharma University.

Darusalam, Darusalam (1996) Water chiller in Novotel Hotel. Skripsi thesis, Sanata Dharma University.

Daryono, Thomas (1996) Perancangan pompa sentrifugal dua tingkat. Skripsi thesis, Sanata Dharma University.

Erwanto, Erwanto (1996) Design of refrigeration system with vertical evaporation of milk product capacity 26 TR. Skripsi thesis, Sanata Dharma University.

Ferdinand, Ferry (1996) Air conditioning system in Taksaka executive train [Refrigerant: Petrozon rossy-22]. Skripsi thesis, Sanata Dharma University.

Gandung H. S., Chris. (1996) Kran jalan kapasitas 20 ton. Skripsi thesis, Sanata Dharma University.

Ginting, Bersama (1996) The effect of cutting speeds and chips thickness on the power of motor on machine CNC TU 3A. Skripsi thesis, Sanata Dharma University.

Haryanto, Andi (1996) Spiral suspension of minibus. Skripsi thesis, Sanata Dharma University.

Hera, Paulus P. (1996) Clean water centrifugal pump. Skripsi thesis, Sanata Dharma University.

Hermawan, Yakubus Anton (1996) The effect of aging on aluminium alloys 5083. Skripsi thesis, Sanata Dharma University.

Hikmawan, Antonius Yusianto (1996) Sistem pengkondisian udara hotel berbintang lima. Skripsi thesis, Sanata Dharma University.

Irawan, Ignatius Tulus (1996) The influence of fiber volume fraction on the tensile strength of the composite materials. Skripsi thesis, Sanata Dharma University.

Joko Cahyono, Mateus Simbar (1996) The comparison of the use of ET 242 dan TU-2A machines to the CAD-CAM program from emcodraft. Skripsi thesis, Sanata Dharma University.

Kiscahaya, Rizal (1996) Uji kelelahan dan bentuk patahan baja MS 709. Skripsi thesis, Sanata Dharma University.

Kumbarasari, Shanti (1996) Penelitian sifat-sifat baja bohler grade my extra [60WCrV7] untuk aplikasi cutting tools. Skripsi thesis, Sanata Dharma University.

Kustadi, Markus Yoyok (1996) Double suction centrifugal pump 1. Skripsi thesis, Sanata Dharma University.

Kusumo, M.D. Jati (1996) Design of the florist chamber for orchid. Skripsi thesis, Sanata Dharma University.

Laksana, Henky (1996) Design of sawing machine for limestone. Skripsi thesis, Sanata Dharma University.

Lebao, Daniel Herman Yoseph (1996) Sistem pendingin pada bus penumpang eksekutif. Skripsi thesis, Sanata Dharma University.

Lewi, Lewi (1996) Feed boiler pump. Skripsi thesis, Sanata Dharma University.

Martino, Alexander Dhino (1996) The effect of carburizing on medium carbon steel. Skripsi thesis, Sanata Dharma University.

Nadeak, Obor Lambok S.J. (1996) Perencanaan pompa bahan bakar minyak tanah Kerosene. Skripsi thesis, Sanata Dharma University.

Nugraha, Jati Eka (1996) Open radial centrifugal pump. Skripsi thesis, Sanata Dharma University.

Nugroho, Agung (1996) The effects of quenching and tempering on tensile strength, hardness and micro structure of EMS-45. Skripsi thesis, Sanata Dharma University.

Nugroho, Yulius Eko (1996) The effect of fiber orientation on mechanical behavior of GFRP Composite E-Glass/Poliester Ortophtalic TA 136. Skripsi thesis, Sanata Dharma University.

Papu, Natanael D. D. Pesa (1996) Mechanical and physical properties of cast iron for train brake. Skripsi thesis, Sanata Dharma University.

Pardede, Harapan M. (1996) Double suction centrifugal pump. Skripsi thesis, Sanata Dharma University.

Prabowo, FX. Sigit Bani (1996) Three Stage Centrifugal Pump. Skripsi thesis, Sanata Dharma University.

Pramono, Thomas Wisnu Idhi (1996) Keliatan baja MS 709 sebagai fungsi perlakuan panas. Skripsi thesis, Sanata Dharma University.

Purwanto, - (1996) Redesign pompa sentrifugal produksi pengrajin cor logam Ceper. Skripsi thesis, Sanata Dharma University.

Purwanto, Andreas (1996) Locomotive boiler. Skripsi thesis, Sanata Dharma University.

Rumbayan, Charles Nicolaus (1996) Centrifugal pump with the capacity of 95 m3/hour, head 20 m. Skripsi thesis, Sanata Dharma University.

Saputra, I Nyoman Murbawa (1996) Ice cream cold storage. Skripsi thesis, Sanata Dharma University.

Sebayang, Andreas (1996) Pompa sentrifugal kapasitas 102 M3/jam, head 24 meter. Skripsi thesis, Sanata Dharma University.

Sembiring, Jansen (1996) The effect of aging on the hardness and micro structure of the Sae C83600 copper alloy. Skripsi thesis, Sanata Dharma University.

Setianegoro, Johanes Babtista Rika (1996) Scale water pump. Skripsi thesis, Sanata Dharma University.

Setiyatmo, Setiyatmo (1996) Air conditioning for university administration building. Skripsi thesis, Sanata Dharma University.

Sidauruk, Rudolf (1996) Redesign chilled water pump. Skripsi thesis, Sanata Dharma University.

Sidhi, Gregorius Indra Bayu Purnomo (1996) Design of industrial painting robot. Skripsi thesis, Sanata Dharma University.

Sinaga, Rajamen (1996) Kendaraan pengangkut sampah di perumahan dengan menggunakan mesin kubota. Skripsi thesis, Sanata Dharma University.

Sinarto, Paulus Raharjo (1996) Short fire box boiler. Skripsi thesis, Sanata Dharma University.

Susanto, Antonius Pratomo Heru (1996) The effect of temper on the MS 709 steel alloy. Skripsi thesis, Sanata Dharma University.

Sutarto, Sutarto (1996) The design of centrifugal pump capacity : 36 m3/hour. Skripsi thesis, Sanata Dharma University.

Tri Handoko, Fransiscus Xavereus (1996) Single stage compressor. Skripsi thesis, Sanata Dharma University.

Tri Haryadi, Christusporus (1996) Sugar factory crane capacity 15 ton. Skripsi thesis, Sanata Dharma University.

Triwidayanto, Agus (1996) Centrifugal pump single stage vertical axle. Skripsi thesis, Sanata Dharma University.

Vembriarto, Yosafat (1996) Design of irrigation pump. Skripsi thesis, Sanata Dharma University.

Wahyudi, Franciskus Teguh (1996) Pompa sentrifugal untuk fluida kental. Skripsi thesis, Sanata Dharma University.

Wahyudi, Lanjar (1996) Material handling robot. Skripsi thesis, Sanata Dharma University.

Wibowo, Hengki Prasetio (1996) Perancangan mesin bor vertikal 12 variasi kecepatan. Skripsi thesis, Sanata Dharma University.

Widhi, Andreas Reky Kurnia (1996) Reda pump. Skripsi thesis, Sanata Dharma University.

Widhiatmoko, Benedictus Ambar (1996) Comparison between finishing surface with parallel steep and shallow using master CAM 8. Skripsi thesis, Sanata Dharma University.

Windyatama CN, FX. (1996) Radial centrifugal pump. Skripsi thesis, Sanata Dharma University.

Youhansa, Yosep (1996) The effect of tempering holdingtime on the physical and mechanical properties of MS 705 alloy steel. Skripsi thesis, Sanata Dharma University.

This list was generated on Sun Dec 22 11:28:02 2024 UTC.