Items where Division is "Faculty of Science and Technology > Department of Mechanical Engineering" and Year is 2005

A

Angga, Ike (2005) The influence of biot number to the thermal distribution pattern at unsteady-state condition of the two dimensional solid matter with uniform heat generation. Skripsi thesis, Sanata Dharma University.

Aryanto, Robertus Bayu (2005) Distribusi suhu pada benda padat tiga dimensi berbangkit energi secara merata keadaan tak tunak. Skripsi thesis, Sanata Dharma University.

Atmoko, Teguh Dwi (2005) Generator uap Scotch. Skripsi thesis, Sanata Dharma University.

B

Budiaji Andra Suryadi, Anthonius (2005) Pengaruh suhu curing terhadap sifat mekanis dan fisis komposit polimer (20% e-glass; 79,7% resisn eternal 2504; 0,3% katalis). Skripsi thesis, Sanata Dharma University.

D

Darmawan, Fendi (2005) The air conditioning system of Panti Rapih Hospital. Skripsi thesis, Sanata Dharma University.

Darmawan, Paulus Agus (2005) Pengaruh temperatur curing terhadap sifat mekanis dan fisis komposit polimer [E Glass dan Justus 108]. Skripsi thesis, Sanata Dharma University.

Darmawan, Toni (2005) Mesin slotter untuk baja kekuatan tinggi delapan variasi kecepatan. Skripsi thesis, Sanata Dharma University.

F

F.D.P. Guntur Wijaya, - (2005) Belt conveyor for clay and limestone capacity 900 tph. Skripsi thesis, Sanata Dharma University.

Firmanto HR., Hendy (2005) Mekanisme katup SOHC dan DOHC mesin bensin 1,5 liter. Skripsi thesis, Sanata Dharma University.

Furniawan, Furniawan (2005) A distribution of temperature of a three-dimensional solid in unsteady states = Pola distribusi suhu pada benda padat 3 dimensi keadaan tak tunak. Skripsi thesis, Sanata Dharma University.

H

Harenbi, Ricky (2005) Pengaruh pergantian panjang, diameter alat potong dan kedalaman pemakan terhadap ketidakrataan benda hasil pemotongan mendatar. Skripsi thesis, Sanata Dharma University.

Hatmoko, Yohanes Tri (2005) The effect of welding on ST 37 steel. Skripsi thesis, Sanata Dharma University.

Hendrata, Samuel (2005) Pembangkit listrik tenaga panas menggunakan termoelektrik. Skripsi thesis, Sanata Dharma University.

I

Indra, Indra (2005) Pengaruh kelangsingan pada baja lunak dengan pemakanan kasar. Skripsi thesis, Sanata Dharma University.

Isdiyanto, Turibius (2005) Pompa air demin. Skripsi thesis, Sanata Dharma University.

K

Karnadi, Juliarto (2005) Pengaruh waktu aging terhadap struktur mikro, kekuatan tarik, dan kekerasan Al-Si-Cu. Skripsi thesis, Sanata Dharma University.

Kiswantoko, - (2005) Perancangan turbocharger untuk mesin diesel 2500 cc dengan injeksi langsung. Skripsi thesis, Sanata Dharma University.

Kristiani, C. Nova (2005) The effect of tempeore and quenching on low carbon steel. Skripsi thesis, Sanata Dharma University.

Kuncoro, Franxiscus Cacuk (2005) Pompa sentrifugal untuk bubur kertas. Skripsi thesis, Sanata Dharma University.

M

Mutiara I.P, Deviana (2005) The effect of the curing system on two axis continous e-glass fiber composite mechanics and micro structure characteristic. Skripsi thesis, Sanata Dharma University.

N

Negara, Yohanes Rudy Perwira (2005) Thermal conductivity of metal materials : aluminium, steel and copper. Skripsi thesis, Sanata Dharma University.

Nickara, Bayu (2005) Pengaruh sand blasting terhadap sifat fisis dan mekanis pada besi cor. Skripsi thesis, Sanata Dharma University.

Nugrahadi, Yustinus Ardian (2005) Mesin diesel 2,5 L injeksi langsung dengan turbocharger dan tanpa turbocharger. Skripsi thesis, Sanata Dharma University.

Nugroho, A. Kristiawan (2005) Pengaruh kecepatan pemakanan terhadap penyimpangan kesilindrisan, kebulatan dan konsentrisitas sumbu = [The effect of feeding on cilindricity, circularity, and concentricity deviation]. Skripsi thesis, Sanata Dharma University.

Nugroho, Kelik Sigid (2005) The air conditioning system of building management Plaza Centris. Skripsi thesis, Sanata Dharma University.

P

Prasetya C, Dionisius Budi (2005) Pengaruh suhu dan lama curing terhadap sifat mekanis dan fisis komposit matrik polimer dengan penguat serat tipe e-glass woven dan matrik justus 108. Skripsi thesis, Sanata Dharma University.

Prasetyo, Albert Bayu (2005) Pabrik es. Skripsi thesis, Sanata Dharma University.

Prasetyo, Boby Endro (2005) Pengaruh suhu curing terhadap sifat fisis dan mekanis komposit Polimer [serat E-glass dan Resin Eternal 2504]. Skripsi thesis, Sanata Dharma University.

Prasetyo, Willi Brordus Judie Dwi (2005) Motor bakar 1,5 L dengan saluran gas buang konfigurasi. Skripsi thesis, Sanata Dharma University.

Prasetyo, Yanuarius Budi (2005) Generator uap pipa air. Skripsi thesis, Sanata Dharma University.

Purwanto, Agustinus Setyo (2005) Motor bakar 1,5 L dengan saluran gas buang konfigurasi 4-2-1. Skripsi thesis, Sanata Dharma University.

S

Salim, Nur (2005) Kotak pendingin termoelektrik untuk membawa vaksin. Skripsi thesis, Sanata Dharma University.

Sandayu, Venansius Khrisna (2005) Thermal conductivity of metal material : steel, iron and brass. Skripsi thesis, Sanata Dharma University.

Sasongko, Robertus Bellarmino Heru (2005) Perubahan sifat fisis dan mekanis camshaft aspira setelah temper 300[o]C dengan waktu penahanan 1 jam, 3 jam, 5 jam. Skripsi thesis, Sanata Dharma University.

Satriya, Bayu agung (2005) Kran jalan kapasitas 80 ton. Skripsi thesis, Sanata Dharma University.

Setiadi, Lasarus Hari (2005) Penelitian unjuk kerja refrigeran hidrokarbon produksi PT Pertamina [Persero]. Skripsi thesis, Sanata Dharma University.

Setiawan, Nicodemus Fajar (2005) The effect of TiN ion implantation on the corrosion resistance of low carbon steel in chloride media. Skripsi thesis, Sanata Dharma University.

Setiyawan, Yohanes Benny (2005) Locomotive boiler. Skripsi thesis, Sanata Dharma University.

Setyawan, Sigit (2005) Pengering kayu tenaga surya. Skripsi thesis, Sanata Dharma University.

Sri Murwati, - (2005) Pompa nira mentah dengan kapasitas 120 M[3]/jam dan head 50 M. Skripsi thesis, Sanata Dharma University.

Sri Sutopo Wahyu Santoso, - (2005) Mesin dril untuk pengerjaan pelat dari baja lunak dengan jumlah lubang 12 berjajar dengan 8 variasi kecepatan. Skripsi thesis, Sanata Dharma University.

Sugiyanto, Sugiyanto (2005) Temperature distribution of two dimension composite solidin unsteady state with generating energy at one of them. Skripsi thesis, Sanata Dharma University.

Sulistiyanto, Vin Widi Handoko (2005) Pengaruh suhu curing terhadap sifat fisis dan mekanis komposit polimer (20% e-glas; 79,7% resin eternal 2504; 0,3% katalis). Skripsi thesis, Sanata Dharma University.

Suryanto, Yakubus Hemawan (2005) Analisis gerak berdiri daru dua posisi duduk. Skripsi thesis, Sanata Dharma University.

Suryawan, Soviandi (2005) Mesin Diesel 2,5 L injeksi langsung dengan piston multi-spherical. Skripsi thesis, Sanata Dharma University.

Susilaningtyas, A. Budi (2005) Proses adsorpsi pada sistem pendingin adsopsi Zeolit-air. Skripsi thesis, Sanata Dharma University.

Susilo, Anton (2005) Pengaruh suhu curing terhadap sifat mekanis dan fisis komposit polimer (30% e-glass; 69,7% resin eternal 2504; 0,3% katalis). Skripsi thesis, Sanata Dharma University.

Susilo, Marcellinus Darwin (2005) The influence of Biot Number [BI] on two dimensional unsteady state circle surface. Skripsi thesis, Sanata Dharma University.

T

Taat. H., Thomas Aquino (2005) Unjuk kerja kolektor termal surya jenis parabola silinder. Skripsi thesis, Sanata Dharma University.

Tanu. S, Ag. Dwi Putranto (2005) Pengaruh elektroda las terhadap kekuatan tarik, kekerasan dan struktur mikro pada pengelasan besi cor nodular. Skripsi thesis, Sanata Dharma University.

Tarwan, Dwi Akwin (2005) Distribusi suhu pada benda padat tiga dimensi keadaan tak tunak. Skripsi thesis, Sanata Dharma University.

W

Wibowo, Satrio (2005) Proses adsorpsi Silika Gel-air. Skripsi thesis, Sanata Dharma University.

Wihartanto, Yudyana Prasetya (2005) Pengaruh suhu curing terhadap sifat mekanis dan fisis komposit polimer (30% e-glass ; 69,7% resin eternal 2504 ; 0,3% katalis). Skripsi thesis, Sanata Dharma University.

Wijaya, Yakub Tomi (2005) Curtis turbines. Skripsi thesis, Sanata Dharma University.