Items where Division is "Faculty of Science and Technology > Department of Mechanical Engineering" and Year is 1999

A

Aderianto, Martin (1999) Pompa sentrifugal untuk 120 rumah tipe menengah. Skripsi thesis, Sanata Dharma University.

Adi, Roberthus Bayu Prasetyo (1999) Lelah korosi pada baja karbon rendah. Skripsi thesis, Sanata Dharma University.

Andrianto, Oscar (1999) The effect of conventional and climbing feeds on surface roughness and radius compensation on thoroughness. Skripsi thesis, Sanata Dharma University.

Anen, Antonius (1999) Proses adsorpsi dalam pendingin adsorpsi metanol-karbon aktif tenaga surya. Skripsi thesis, Sanata Dharma University.

Anggoro, Aris (1999) Kinematic and dynamic analysis of Kawasaki FS03 robot. Skripsi thesis, Sanata Dharma University.

Anggoro, Nur Setyo Wahyu (1999) The effects of temper on the handness, toughness and microstructure of thyrodur 2379 steel alloys. Skripsi thesis, Sanata Dharma University.

Antonius, Harry (1999) Perancangan prime mover loader untuk tanah liat dengan kapasitas bucket 5 meter kubik. Skripsi thesis, Sanata Dharma University.

Antoro, Hari Dwi (1999) Air conditioning for indoor tennis. Skripsi thesis, Sanata Dharma University.

Apriyanto, Crippen (1999) Pengaruh kadar perak terhadap sifat fisis dan mekanis coran aluminium. Skripsi thesis, Sanata Dharma University.

Aryanto, B. Dwi (1999) Research of physical and mechanical woven roving fiber composite [e-type] with justus 157 resin and 1 layer of woven roving. Skripsi thesis, Sanata Dharma University.

B

Barage, Yosua (1999) Container crane capacity 40 ton. Skripsi thesis, Sanata Dharma University.

Basworo, Tito Purno (1999) Pengaruh variasi prosentase volume serat sifat fisis dan mekanis komposit [Arindo 3210 dan serat E-Glas]. Skripsi thesis, Sanata Dharma University.

Bheo, Yohanes Veto Pati (1999) Pengaruh quenching dengan berbagai media pendingin terhadap kekerasan gear sepeda motor honda. Skripsi thesis, Sanata Dharma University.

Budi, Y.M.G. Sigit Prasetya (1999) The effect of welding on metal A-287. Skripsi thesis, Sanata Dharma University.

Budi Santoso, Yohanes Hario (1999) Proses adsorpsi pendingin karbon aktif - metanol tenaga surya. Skripsi thesis, Sanata Dharma University.

Bunga, Melsonsius R. (1999) Pompa pengairan sawah. Skripsi thesis, Sanata Dharma University.

Buwonomurti, Pius Danisworo (1999) Pengaruh penambahan perak [Ag] terhadap perubahan sifat fisis dan mekanis coran aluminium tembaga [Al-Cu]. Skripsi thesis, Sanata Dharma University.

C

Cahyadi, Anthon (1999) Pemanas air tenaga surya jenis kolektor terpadu dengan tangki tersusun seri. Skripsi thesis, Sanata Dharma University.

Christiyanta, Andy (1999) Kompor tenaga surya jenis parvati. Skripsi thesis, Sanata Dharma University.

D

Darmawan, Eliezer Rina (1999) Unjuk kerja kolektor termal jenis parabola piringan. Skripsi thesis, Sanata Dharma University.

Daryadi, Mateus (1999) Distribusi suhu dari waktu ke waktu pada benda satu dimensi keadaan tak unak dengan nilai k=k(T). Skripsi thesis, Sanata Dharma University.

F

Frederiek.S, Nine (1999) Pompa air pengisi ketel : head 55m, kapasitas 35 m3/jam, putaran 2968 rpm. Skripsi thesis, Sanata Dharma University.

G

Gahara, Rafael Anggara Wira (1999) Suspension system of standard commercial vehicle. Skripsi thesis, Sanata Dharma University.

Gultom, Very Ibet (1999) 39 m3/hour centrifugal pump [radially split]. Skripsi thesis, Sanata Dharma University.

H

Hanggoro, Albertus Prasetyo (1999) The effects of D4 and D5 parameters on circular pocket milling cycle on VMC 200 machine. Skripsi thesis, Sanata Dharma University.

Hardiyanto, Thomas (1999) Pengaruh temper terhadap kekuatan tarik, kekerasan dan struktur mikro besi cor nodular. Skripsi thesis, Sanata Dharma University.

Harmanto, Didik (1999) Telescopic crane kapasitas 5 ton. Skripsi thesis, Sanata Dharma University.

Hartanto, Stanislaus (1999) Research of physical and mechanical woven roving fiber composite [e-type] with justus 157 resin and 3 layer of woven roving. Skripsi thesis, Sanata Dharma University.

Hartoko, Ardoyo Wahyu Muji (1999) The influence of quenching by fuel diesel cooler media on the hardness, tensile strength and impact strength of ST 42. Skripsi thesis, Sanata Dharma University.

Haryanto, Agustinus (1999) Locomotive boiler. Skripsi thesis, Sanata Dharma University.

Hermawan, Yonatan Danang Hermawan (1999) 40 m3/hour centrifugal pump. Skripsi thesis, Sanata Dharma University.

I

Irawan, Irawan (1999) Pompa sentrifugal vertikal satu tingkat. Skripsi thesis, Sanata Dharma University.

Isnadi, Hari Nur (1999) Pompa sentrifugal dengan kapasitas 90 L/m, HEAD 35 m. Skripsi thesis, Sanata Dharma University.

J

Jaya, Fransiskus Xaverius Harya Pamungkas P. (1999) Unjuk kerja pesawat terbang jenis N250-100. Skripsi thesis, Sanata Dharma University.

Joni, Agustinus (1999) Over hung impeller pump. Skripsi thesis, Sanata Dharma University.

Juniansyah, Raden Mochamad (1999) Pengaruh karburising terhadap kekerasan sproket sepeda motor. Skripsi thesis, Sanata Dharma University.

K

KLau, Yulius (1999) Solar rice dryer. Skripsi thesis, Sanata Dharma University.

Krisdianto, Vincentius Udhidarma (1999) Dozer shovel transmission system. Skripsi thesis, Sanata Dharma University.

Krisdiyanto, Robertus Aris (1999) Water pump for industry. Skripsi thesis, Sanata Dharma University.

Kristiani, C. Nova (1999) The effect of tempeore and quenching on low carbon steel. Skripsi thesis, Sanata Dharma University.

Kristiantara, Andreas Bagus (1999) The effect of cutting speed and material hardness to the precision on S 25 C and S 45 C using gildemeister NEF 520. Skripsi thesis, Sanata Dharma University.

Kristyanto, Stephanus (1999) Irrigation pump. Skripsi thesis, Sanata Dharma University.

Kurniawan, Feri (1999) Pompa centrifugal kapasitas 90 m3/jam tinggi tekan 12 meter = 90 m3/hour centrifugal pump head 12 m. Skripsi thesis, Sanata Dharma University.

Kurniawan, Thomas Ony (1999) Pengaruh parameter pemotongan pada kekasaran permukaan baja karbon rendah : the effects of cutting parameters on the surface roughness of low carbon steel. Skripsi thesis, Sanata Dharma University.

Kurniawan, Vicentius Andri (1999) Kran menara kapasitas 1 ton. Skripsi thesis, Sanata Dharma University.

Kustanto, Kustanto (1999) Water pump for industry. Skripsi thesis, Sanata Dharma University.

L

Lazuardi, Thomas Adhitya Bayu (1999) Pengaruh variasi prosentase volume serat pada sifat fisis dan mekanis komposit [Resin arindo 3210 dan serat E-glass kontinyu]. Skripsi thesis, Sanata Dharma University.

Lilik W.H., Aghata (1999) Carburizing of low carbon steel. Skripsi thesis, Sanata Dharrma University.

M

Maryanto, Heru (1999) The effect of welding current and welding time on low carbon steel spot welding. Skripsi thesis, Sanata Dharma University.

N

Nadia, Nadia (1999) Executive bus air conditioning. Skripsi thesis, Sanata Dharma University.

Nugroho, An. Sigit Wahyu (1999) Thermosiphon solar water heater system with reflector. Skripsi thesis, Sanata Dharma University.

O

Oktarianto, Dwi (1999) Pompa air limbah pada industri perminyakan. Skripsi thesis, Sanata Dharma University.

P

Palimirma, Nugroho Agung (1999) Air conditioning system for sport hall. Skripsi thesis, Sanata Dharma University.

Pelupessy, Robert Nicodemus (1999) Peningkatan kekerasan sproket sepeda motor Kawasaki, Suzuki dan Yamaha dengan karburising arang kayu. Skripsi thesis, Sanata Dharma University.

Pemayun, Cokorda Gde Putra (1999) Perbandingan sifat akustik komposit polimer [serat E-Glass dan justus 157] dan kayu bengkirai sebagai bahan alat musik Rindik Gandrung Bali. Skripsi thesis, Sanata Dharma University.

Philipus, Agus Handoyo Catur Nugroho (1999) Pompa air bersih dengan kapasitas 135 liter/menit dan head 30 meter. Skripsi thesis, Sanata Dharma University.

Pitang, Petrus Boyke (1999) 16 ton/hours locomotive boiler. Skripsi thesis, Sanata Dharma University.

Pramono, Wahyudi Eko (1999) Vertical drilling machine [equivalen with type H5-3C]. Skripsi thesis, Sanata Dharma University.

Pranata, Stevi (1999) Kotak gigi mesin bubut dengan 15 macam kecepatan Spindle. Skripsi thesis, Sanata Dharma University.

Pranowo, Thomas (1999) Galeria Mall air conditioning. Skripsi thesis, Sanata Dharma University.

Prasetiyo, Eko (1999) The effects of sputtering on the hardness, tensile strength and toughness of low carbon steel. Skripsi thesis, Sanata Dharma University.

Prasetyo, Bram (1999) Locomotive boiler. Skripsi thesis, Sanata Dharma University.

Prasetyotomo, Antonius Dhanis (1999) The influence of quenching by water cooler media to ST 42. Skripsi thesis, Sanata Dharma University.

Prastowo, Ibnu (1999) Pengaruh penambahan magnesium (Mg) terhadap perubahan sifat fisis dan mekanis coran aluminium tembaga (Al-Cu). Skripsi thesis, Sanata Dharma University.

Proklamasi, Yohanes Nugroho Ari (1999) Pengaruh suhu dan lama curing terhadap sifat fisis dan mekanis komposit polimer [Arindo 3210, katalis mepoxe dan serat gelas E]. Skripsi thesis, Sanata Dharma University.

Purwanto, Feri Edi (1999) Pengaruh volume serat gelas acak [random] terhadap sifat mekanis dan fisis komposit polimer. Skripsi thesis, Sanata Dharma University.

Putro, Yohanes Nadahadi Kristianto (1999) The design of air compressor with two cylinders. Skripsi thesis, Sanata Dharma University.

R

Rachmad, Maulana Arief (1999) Cold storage untuk menyimpan hasil laut kapasitas pendinginan 50 tr. Skripsi thesis, Sanata Dharma University.

Riskie, Riskie (1999) Water pump for a three-storied hotel with 2000 rooms. Skripsi thesis, Sanata Dharma University.

Robertus, Raharjo (1999) Air conditioning for convention centre. Skripsi thesis, Sanata Dharma University.

S

Sambodo, Yohanes (1999) Analisis hasil pemotongan melingkar mesin CNC DMC 63V dengan material baja lunak. Skripsi thesis, Sanata Dharma University.

Santoso, Ananta Dwi (1999) Research of physical and mechanical properties of woven roving fiber composite [e-type] with justus 157 resin and two layer of woven roving. Skripsi thesis, Sanata Dharma University.

Santoso, Bambang Agung (1999) Pengaruh orientasi serat e-glass terhadap sifat fisis dan mekanis komposit (30% serat e-glass, resin justus 157). Skripsi thesis, Sanata Dharma University.

Santoso, Petrus Yuyun (1999) Karakteristik lelah korosi pada baja karbon rendah. Skripsi thesis, Sanata Dharma University.

Sapta S., Albertus Widiatmaka (1999) Sifat fisis dan mekanis piston bekas pada sepeda motor merk Honda, Suzuki, dan Yamaha. Skripsi thesis, Sanata Dharma University.

Saptiawan, Leonard Boni (1999) Transmisi daya sepeda motor Vega dengan modifikasi recycle. Skripsi thesis, Sanata Dharma University.

Saputro, Gunawan Manto (1999) Perancangan dan pembuatan tabung reservoir reaktor samop dengan bahan stainless steel 304. Skripsi thesis, Sanata Dharma University.

Seno, Ammittoba Deny Widyo (1999) Perancangan truk pengangkut kontainer (tractor head) dengan daya 200 hp. Skripsi thesis, Sanata Dharma University.

Setiawan, Donny (1999) Pengaruh aging terhadap ketahanan lelah coran aluminium paduan. Skripsi thesis, Sanata Dharma University.

Setiawan, Heru (1999) A redesign of motor grader equivalent with Mitsubishi MG330. Skripsi thesis, Sanata Dharma University.

Setiyono, Dwi (1999) Perhitungan umur tabung pemanas dengan bahan baja karbon sedang menggunakan pemrograman borland delphi 6.0. Skripsi thesis, Sanata Dharma University.

Setyawan, Noki (1999) Pemanas air energi surya untuk industri minuman. Skripsi thesis, Sanata Dharma University.

Setyawan, Petrus Agung (1999) Pompa sentrifugal poros mendatar, impeler setengah terbuka kapasitas 60 m3/ jam. head 30 m. Skripsi thesis, Sanata Dharma University.

Situmorang, Barmen (1999) Pengaruh fraksi berat serat rami terhadap kekuatan tarik komposit dengan proses curing. Skripsi thesis, Sanata Dharma University.

Suhartono, Suhartono (1999) Slurry pump with 60 m3/hour in capacity and 26 m in head. Skripsi thesis, Sanata Dharma University.

Sukaryana, I Wayan Gede Eka (1999) The effects of temper on the hardness and tensile strength of thyrodur 2379 steel alloys. Skripsi thesis, Sanata Dharma University.

Sulistya, Antonius Hery (1999) Sistem kemudi pada kendaraan berpenggerak roda depan. Skripsi thesis, Sanata Dharma University.

Sumantri, Albert Iwan (1999) Karakteristik modul pendingin termoelektrik pada pendingin air. Skripsi thesis, Sanata Dharma University.

Sumaryoto, Sumaryoto (1999) Pompa sentrifugal dengan kapasitas 15,600 m3/jam dan head 34 m. Skripsi thesis, Sanata Dharma University.

Sunaryo, Roni (1999) Transmisi mesin gerinda permukaan untuk material, besi cor. Skripsi thesis, Sanata Dharma University.

Suryo Sudibyo, Bayu (1999) The influence of quenching by oil cooler media to ST 42. Skripsi thesis, Sanata Dharma University.

Suryono, Ignatius Teguh (1999) Capsule elevator with eco disc. Skripsi thesis, Sanata Dharma University.

Susatyo, Emanuel Vivien (1999) Karakteristik modul pendingin termoelektrik pada kotak pendingin obat. Skripsi thesis, Sanata Dharma University.

Suwantara, Danang (1999) Mesin sekrap. Skripsi thesis, Sanata Dharma University.

Suyud, - (1999) Pompa poros vertikal. Skripsi thesis, Sanata Dharma University.

T

Talaga, Riasinir Prisca Pitaria (1999) Corrosion fatigue on low-carbon steel. Skripsi thesis, Sanata Dharma University.

Tambunan, Wilson Natalido (1999) Karakteristik komposit serat serabut kelapa dengan matrik polyester. Skripsi thesis, Sanata Dharma University.

Tri Nugroho, Y. Krisnadi (1999) Schots boiler. Skripsi thesis, Sanata Dharma University.

Tridarto, - (1999) Design of industrial waste water pump. Skripsi thesis, Sanata Dharma University.

Triharpinto, Fx. Andesta (1999) Pengaruh penambahan Si terhadap sifat fisis dan mekanis paduan aluminium. Skripsi thesis, Sanata Dharma University.

W

Wahyudi, - (1999) Generator uap dan gas locomotive boiler for lorry. Skripsi thesis, Sanata Dharma University.

Wermasaubun, Pius Isak Artoky (1999) Mesin drill radial = [Radial drilling machine]. Skripsi thesis, Sanata Dharma University.

Wiarka, Gede Bagus Harrie Purnama (1999) Pemanas air tenaga surya untuk rumah tangga. Skripsi thesis, Sanata Dharma University.

Wibowo, Hadrianus Dimas (1999) Pengaruh penambahan timbal [Pb] terhadap perubahan sifat fisis dan mekanis coran aluminium. Skripsi thesis, Sanata Dharma University.

Wibowo, Hendy (1999) Design of horizontal milling machine transmission for spur gear cutting. Skripsi thesis, Sanata Dharma University.

Wibowo, Herry (1999) The eight-speed of lathe machine gearbox for medium steel materials. Skripsi thesis, Sanata Dharma University.

Wibowo, Wahyu (1999) 36 m3/h centrifugal pump. Skripsi thesis, Sanata Dharma University.

Wicaksono, Martinus Bagus (1999) Perencanaan mesin sekrap dengan penggerak hidrolik : design of shaper machine by hidraulic drive. Skripsi thesis, Sanata Dharma University.

Widjayarto, Adji (1999) Pengaruh orientasi serat terhadap sifat fisis dan mekanis komposit [serat Gelas-E, Resin Justus 157]. Skripsi thesis, Sanata Dharma University.

Widodo, Heru (1999) Design of vertical milling machine for T-Slot profile. Skripsi thesis, Sanata Dharma University.

Wijanarko, Wahyu Widhi (1999) Feed gearbox of lathe machine. Skripsi thesis, Sanata Dharma University.

Wijaya, Sigit Rama (1999) 2.5 tons tower crane. Skripsi thesis, Sanata Dharma University.

Wijaya V.H., Agus (1999) Pengaruh Suhu curing terhadap sifat mekanis dan fisis komposit polimer [E-glass dan Arindo 3210]. Skripsi thesis, Sanata Dharma University.

Winarto, Gabriel (1999) Perancangan sistem transmisi kendaraan tipe bis kota. Skripsi thesis, Sanata Dharma University.

Wirawan, Andry Billy (1999) Additive effect to Gasoline Engine performance and exhaust gas emission. Skripsi thesis, Sanata Dharma University.

Y

Yohanes, Belasius (1999) Pemotongan lurus dengan harga pemakaian 25% di atas data teknis produk. Skripsi thesis, Sanata Dharma University.

Yosep, - (1999) Transmisi mesin drill multi spindel. Skripsi thesis, Sanata Dharma University.

Yulianto, Roni (1999) Solar water heater modeling system. Skripsi thesis, Sanata Dharma University.

Yuniarto, Fredinandus Jerry (1999) Transmission system design on standard commercial vehicle. Skripsi thesis, Sanata Dharma University.